Six Wheel Three Mode Steering System
Author(s):
Yuverajaa J E S , RVS Technical campus-Coimbatore; Sunil Prakash J, RVS Technical campus-Coimbatore; Pradeepraj S, RVS Technical campus-Coimbatore; Prabhakaran.G, RVS Technical campus-CoimbatoreKeywords:
Steering, Wheels, Steering Column, Gears, BearingsAbstract:
The most conventional and general steering arrangement is to turn the front wheels using a hand–operated steering wheel which is positioned in front of the driver. The six wheel three mode steering system is a modification for the present steering which is used for the improvement of easiness for vehicle handling. The six wheel three mode steering system assists driver by controlling the steering angle of vehicle's six wheels as the requirement of driver, for making the parking and handling at congested areas easier. For meeting the application the rear wheels steer in the opposite direction or in the same direction of the front wheels, allowing reduced turning radius or sliding of vehicle to sideways. .if we are able to transmit the motion that is given on steering wheel to the rear wheels and able to control like front wheels as our requirements, which is the basic idea of our project six wheel three mode In convertible six wheel steering with three mode operation three steering modes can be changed as needed which assists in parking at heavy traffic conditions, when negotiating areas where short turning radius is needed and in off road Driving. We have fabricated the six wheel steering with three mode operation. The main aim of this project is to steer the vehicle according to the requirement. The six wheel steering is more required in critical roads and in desert roads. In this project we implement.
Other Details:
| Manuscript Id | : | J4RV4I2017 |
| Published in | : | Volume : 4, Issue : 2 |
| Publication Date | : | 01/05/2018 |
| Page(s) | : | 77-82 |
